Pages

• BLOG
• Contact
• LaVoixski
  • Auto Fade Mode
  • i2c Address List
  • Looper
  • Models
  • Parameters
    • Arpeggiator
    • Chromatic Mode
    • Comb Filter
    • Delay & LPF
    • Exciter
    • FilterSelector / BIAS_SHIFT
    • Oscillator Mix Editor
    • Pitch Bend Mode
    • Sequencer Mode
    • Transition
    • Tremolo Mode
  • The description about the system
  • The Interface / Switches and Knobs
  • The setup after turning on the instrument
  • Voicing List
  • Voicing Selector
    • Chord Editor
    • The Chord Sequencer
    • THRES mode
  • Wavetables
• Mbiraski
  • Models
• Operation Manual
• SiteMap
• Uploading the new firmware

Posts by category

• Category: Hardware
  • The sequence selector in 2Voice Mode
  • New dacHandler board for piggy back mount on Teensy4.1
  • Hand driven 8 step sequencer on 2 voice mode
  • Programming the firmware for ribbon controller
  • Making a plate surface for mounting the Bela Trillflex
  • Started making a base for a ribbon controller
  • Type: ID-292
  • Organizing the Confusing Signal System
  • Reassigning the delay line outputs
  • LPF/CombFilter recordings with deep modulation applied.
  • A major error of “mishandling of global variables” placed in the LPF
  • A function to check various settings for each SceneMemory
  • Adding “Depth” to LFO parameters
  • Adjust the deviation value of the data referenced by the interpolation mechanism of CombFilter.
  • How to get the number of sequence steps in SMF
  • The SMF_PLAYER for SolenoidBell system is working properly.
  • Chord Sequencer records with free-run status.
  • Access to the parameter of the Chord Sequencer
  • Consider the parameters to be implemented in LaVoixski@WirelessRemoteController
  • Uploaded a re-recorded version.
  • Operational testing of Wireless Remote Controller with hierarchical parameters.
  • Driving QasarBeach via USB_MIDI from Type: id-292
  • ESP_NOW Remote Controller
  • LaVoixski Type: AN/PRC-6
  • LaVoixski Type: id-292
  • Type: AN/PRC-6 complete
  • Type: 1455K
  • Measuring Capacitor and Resistor by Clip
  • Measuring the parameter of the PNP Pair 2N3727
  • Measuring the parameter of the PNP Pair MD-5000
  • TC1
  • The Oscillator Test Bed for Type_ID-292
  • LaVoixski Type_ID-292 (early model)
  • LaVoixski S-Size
  • Type_ID-292 series (including very early model)
  • GC9A01 / 1.28 Inch Round LCD Module
  • Antenna Parts for Type_AN/PRC-6
  • LaVoixskies (old style without LCD)
  • LaVoixski: Type_AN/PRC-6
• Category: LaVoixski
  • Assembling FPGA boards
  • Write new firmware to Lattice XO2.
  • Production of adc/dacHandler
  • Modified the GUI of SMFplayer.
  • Introducing SdFat Libarly into SolenoidBell
  • Introducing SdFat and matching with JPEGDEC
  • Introduction of SdFat Library
  • Switching the LPF modulation
  • The sequence selector in 2Voice Mode
  • New dacHandler board for piggy back mount on Teensy4.1
  • Hand driven 8 step sequencer on 2 voice mode
  • Programming the firmware for ribbon controller
  • Making a plate surface for mounting the Bela Trillflex
  • Started making a base for a ribbon controller
  • Type: ID-292
  • Organizing the Confusing Signal System
  • Reassigning the delay line outputs
  • LPF/CombFilter recordings with deep modulation applied.
  • Adjusted parameter handling to make CombFilter adjustments smoother
  • Getting the more sweeping range on the combfilter
  • A major error of “mishandling of global variables” placed in the LPF
  • A function to check various settings for each SceneMemory
  • Adding “Depth” to LFO parameters
  • Adjust the deviation value of the data referenced by the interpolation mechanism of CombFilter.
  • The Feedback loop on the comb filter
  • LaVoixski@Revisiting the structure of PitchAnt.
  • LaVoixski@Adding a noise filter to PitchDetector
  • Chord Sequencer records with free-run status.
  • Access to the parameter of the Chord Sequencer
  • Consider the parameters to be implemented in LaVoixski@WirelessRemoteController
  • VoiceMode and address switching from WirelessRemoteController.
  • Uploaded a re-recorded version.
  • Operational testing of Wireless Remote Controller with hierarchical parameters.
  • LPF5 with Resonance
  • Solving the problems on the scale player
  • Driving QasarBeach via USB_MIDI from Type: id-292
  • Re-construct the Pitch Detector
  • ESP_NOW Remote Controller
  • The expansion of the stereo pair LPF to 5 ch system
  • Finding a bug on the Chromatic Mode
  • Linear Interpolation
  • LaVoixski Type: AN/PRC-6
  • LaVoixski Type: id-292
  • Type: AN/PRC-6 complete
  • Type: 1455K
  • The Oscillator Test Bed for Type_ID-292
  • LaVoixski Type_ID-292 (early model)
  • LaVoixski S-Size
  • Type_ID-292 series (including very early model)
  • Antenna Parts for Type_AN/PRC-6
  • LaVoixskies (old style without LCD)
  • LaVoixski: Type_AN/PRC-6
• Category: Mbiraski
  • Access to the parameter of the Chord Sequencer
• Category: Models
  • Hand driven 8 step sequencer on 2 voice mode
  • Type: ID-292
  • Reassigning the delay line outputs
  • A major error of “mishandling of global variables” placed in the LPF
  • A function to check various settings for each SceneMemory
  • LaVoixski Type: AN/PRC-6
  • LaVoixski Type: id-292
  • Type: AN/PRC-6 complete
  • Type: 1455K
  • LaVoixski S-Size
  • Type_ID-292 series (including very early model)
  • LaVoixskies (old style without LCD)
  • LaVoixski: Type_AN/PRC-6
• Category: Parts
  • New dacHandler board for piggy back mount on Teensy4.1
  • Making a plate surface for mounting the Bela Trillflex
  • Started making a base for a ribbon controller
  • Measuring the parameter of the PNP Pair 2N3727
  • Measuring the parameter of the PNP Pair MD-5000
  • The Oscillator Test Bed for Type_ID-292
  • FPGA for DacHandler
  • GC9A01 / 1.28 Inch Round LCD Module
  • Antenna Parts for Type_AN/PRC-6
• Category: Programming
  • Switching the LPF modulation
  • The sequence selector in 2Voice Mode
  • New dacHandler board for piggy back mount on Teensy4.1
  • Hand driven 8 step sequencer on 2 voice mode
  • Programming the firmware for ribbon controller
  • Started making a base for a ribbon controller
  • Organizing the Confusing Signal System
  • Reassigning the delay line outputs
  • A major error of “mishandling of global variables” placed in the LPF
  • Adding “Depth” to LFO parameters
  • Adjust the deviation value of the data referenced by the interpolation mechanism of CombFilter.
  • How to get the number of sequence steps in SMF
  • Access to the parameter of the Chord Sequencer
  • Consider the parameters to be implemented in LaVoixski@WirelessRemoteController
  • LPF5 with Resonance
  • Solving the problems on the scale player
  • Driving QasarBeach via USB_MIDI from Type: id-292
  • Re-construct the Pitch Detector
  • ESP_NOW Remote Controller
  • The expansion of the stereo pair LPF to 5 ch system
  • Finding a bug on the Chromatic Mode
  • Linear Interpolation
• Category: SolenoidBell System
  • How to get the number of sequence steps in SMF
  • The SMF_PLAYER for SolenoidBell system is working properly.
• Category: Type_AN/PRC-6
  • Chord Sequencer records with free-run status.
  • Consider the parameters to be implemented in LaVoixski@WirelessRemoteController
  • Uploaded a re-recorded version.
  • Operational testing of Wireless Remote Controller with hierarchical parameters.
  • LaVoixski Type: AN/PRC-6
  • Type: AN/PRC-6 complete
  • Antenna Parts for Type_AN/PRC-6
  • LaVoixski: Type_AN/PRC-6
• Category: Type_ID-292
  • Started making a base for a ribbon controller
  • Type: ID-292
  • Reassigning the delay line outputs
  • LPF/CombFilter recordings with deep modulation applied.
  • A major error of “mishandling of global variables” placed in the LPF
  • A function to check various settings for each SceneMemory
  • Adding “Depth” to LFO parameters
  • Driving QasarBeach via USB_MIDI from Type: id-292
  • LaVoixski Type: id-292
  • The Oscillator Test Bed for Type_ID-292
  • LaVoixski Type_ID-292 (early model)
  • LaVoixski S-Size
  • Type_ID-292 series (including very early model)

Powered by "WP Sitemap Page"