Access to the parameter of the Chord Sequencer
A function to set the starting address of the Chord Sequencer was implemented on the wireless remote control. As a result of changes to the program that spilled over to the main unit side, the amount of work was greater than expected. In order to execute a circular code with the end of the address
A function to set the starting address of the Chord Sequencer was implemented on the wireless remote control. As a result of changes to the program that spilled over to the main unit side, the amount of work was greater than expected. In order to execute a circular code with the end of the address
Consider the parameters to be implemented in LaVoixski@WirelessRemoteController
SW6, located on the lower left side of the remote controller, was assigned to “record switch only,” but in the first round of program modification, the specifications were changed to allow page switching with HOLD while keeping this functionality. However, as a result of operational tests, it was found that page switching was time-consuming. In
SW6, located on the lower left side of the remote controller, was assigned to “record switch only,” but in the first round of program modification, the specifications were changed to allow page switching with HOLD while keeping this functionality. However, as a result of operational tests, it was found that page switching was time-consuming. In
Uploaded a re-recorded version.
Although it is difficult to understand from the video, the wireless remote control is set to six pages, and uses a forward-only switching mechanism triggered by HOLD (LongPush).　This is very difficult to use, and I would like to use a dial to switch pages if possible, but there are not enough inputs in the MCU
Although it is difficult to understand from the video, the wireless remote control is set to six pages, and uses a forward-only switching mechanism triggered by HOLD (LongPush).　This is very difficult to use, and I would like to use a dial to switch pages if possible, but there are not enough inputs in the MCU
Operational testing of Wireless Remote Controller with hierarchical parameters.
Recorded by 2 condenser microphones with the audio input TC/studioKonnect48. Unfortunately, it seems that the audio file export in 24bit by Audacity failed.
Recorded by 2 condenser microphones with the audio input TC/studioKonnect48. Unfortunately, it seems that the audio file export in 24bit by Audacity failed.
Driving QasarBeach via USB_MIDI from Type: id-292
QasarBeach is a Fairlight CMI emulator running on the Mac OSX.
QasarBeach is a Fairlight CMI emulator running on the Mac OSX.
ESP_NOW Remote Controller
At a DIY shop, I found a rubber bushing of just the right size for making a remote control unit. Considering the storage of a battery unit, I tried to introduce a “chocolate caviar tin,” but was unsuccessful due to opposition from the owner of the tin. Deciding that an open structure would be best
At a DIY shop, I found a rubber bushing of just the right size for making a remote control unit. Considering the storage of a battery unit, I tried to introduce a “chocolate caviar tin,” but was unsuccessful due to opposition from the owner of the tin. Deciding that an open structure would be best
LaVoixski Type: id-292
The id-292 is the Vintage US Army Indicator Channel Alignment Military Walkie-Talkie “AN/PRC-6”. This is the first stable version with LCD display running on the CortexM7.
The id-292 is the Vintage US Army Indicator Channel Alignment Military Walkie-Talkie “AN/PRC-6”. This is the first stable version with LCD display running on the CortexM7.
Type: AN/PRC-6 complete
The “AN/PRC-6” is the Vintage US Army Military Walkie-Talkie. There were some troubles occurred on the audio board and LCD unit, finally they had been completed.
The “AN/PRC-6” is the Vintage US Army Military Walkie-Talkie. There were some troubles occurred on the audio board and LCD unit, finally they had been completed.